Toilets are an essential part of a home, but sometimes they can’t be fixed yourself. When this happens, you need to call a plumber. This professional can use a camera and snake to inspect the plumbing system. This will help them determine where the blockage is, and determine how to remove it. Common blockages include hair, baby wipes, floss, and tree roots. With the proper tools, a plumber can remove these blockages and prevent future problems.
Toilet repair services can cost anywhere from $60 to $200 per job. This includes removing the old fixture and replacing any damaged tiles. The cost of this service will also depend on the extent of the damage. If the damage is minimal, the plumber can repair the seal with repair plates. If the damage is more extensive, however, the plumber may have to replace the entire seal.
Some common problems that require a plumber to repair include a slow toilet. Slow flushing could be due to a leaking flapper, a seal, or a malfunction in the valve. A plumber will be able to quickly diagnose and fix the problem. Some of these issues can be complicated and require a plumbing professional’s expertise.
Despite the many issues associated with toilets, these repairs are often easy to fix when done right. Cracks in the tank and lid may be easy to replace. However, replacing the bowl may be more difficult. The toilet bowl is attached to the floor and connects to the waste exhaust pipe. A handyperson could replace the water tank on their own, but a licensed plumber may be the best choice for this.
Toilets are complicated and should only be left to a professional plumber. When hiring a plumber, make sure to ask all the right questions. Ask about their training and experience and make sure the plumber has a license and insurance. This way, you can avoid unnecessary costs and the unpleasantness of a broken toilet.
The most common toilet problem is a clog. If it can’t be cleared by a plunger, the clog may be too far down the sewer line. If this happens, a plumber may need to snake the drain with a snake. This can cost from $85 to $600. Most plumbers bill by the hour, but there are also plumbers who have a flat fee for removing a clog.
Toilet tank replacement requires more extensive work and usually costs around $250. The tank must be removed and cleaned before a plumber can complete the repair. In addition, the tank will need to be dried out before a plumber can proceed. The tank is then sealed by epoxy, which is usually quite expensive. If this method doesn’t work, the tank will need to be replaced.
If the float ball or tank ball is not the cause of the problem, it may be the ballcock assembly. When this happens, the water shutoff valve should be in the OFF position. In some cases, the ballcock assembly can be defective, which means that the toilet runs constantly. If this is the case, you can remove the ballcock assembly by unscrewing the thumbscrews that hold the valve plunger. The ballcock assembly also includes O-rings and washers.
If the toilet has a major problem, a plumber may need to rebuild the entire toilet. This may cost anywhere from $300 to $600, depending on how difficult it is to access the parts. The cost of rebuilding a toilet depends on several factors, including the location of the problem and the complexity of the repair.
When the toilet has a leaky flush valve, it is likely that the tank ball is cracked or broken. If the ball is unable to connect, a plumber will remove the defective tank ball and install a new valve. In addition, a leaky chain in the tank may also be responsible for the constant running of water. The plumber will repair the chain and reattach it in the tank.
Some toilet repairs can be done by homeowners with basic hand tools, such as replacing the flapper. Others, however, require a plumber to be a professional. Plumbing emergencies can be extremely costly, so it’s important to hire a plumber who is experienced and licensed.