Can Plumbing Pipes Be Exposed?

Can Plumbing Pipes Be Exposed?

What can plumbing pipes do to your home? Anything that water can. Pipes leak, and the leaks give off moisture. What happens when you have water, moisture, and a warm climate? You get dampness and rot. Moisture and heat are the two most common causes of rot in homes. When it comes to plumbing pipes, they can cause a lot of damage very quickly. The first step toward stopping this is recognizing the damage that’s already been done. How much damage has been done? That all depends on how exposed your pipes are, as well as what kind of damage was done to your home. Below are some tips for keeping your plumbing pipes from damaging your home:


Finding exposed pipes

If you’re wondering how much of your plumbing is hidden from sight, you can always start by checking your walls. Plumbing pipes are often hidden behind drywall. If you’ve recently painted or replaced the walls, you may have to dig a little deeper to find them. You can also check the ceiling for pipes. Some pipes are mounted to the ceiling, while others are buried in the wall behind the ceiling tiles.


Seal leaks immediately

Leaks are the number one cause of damage to your plumbing. If you find a leak, seal it immediately. There’s no need to stop and call a plumber. A leaky pipe can cause damage anywhere from a few hours to a few days after the seal has been broken. If you have a large leak, you can replace the damaged area with a rubber hose or sealant. If the leak is a small one, you can try to plug it with a sanitary towel or paper towel.


Use air sealing for permanent repairs

If you have a lot of damage, but you can still piece your pipes back together, seal the leaks that you can. This can work better than tape because it has a higher resistance to liquids. Other than leaking pipes, air sealing is also used for a lot of other repairs. Air sealing involves heating and air cooling the sealant to the desired temperature and pressure. This makes it flexible enough to be shaped into tight corners and around sharp edges.

Small Points Of Interest

Protect your home from future damage

If you have any signs of dampness or rot in your walls, ceilings, or floors, make sure to seal the damage immediately. This can prevent the damage from happening again in the future. If you have damaged pipes inside your walls, you can always have a plumbing professional putty them back together. However, if you have damaged pipes outside your walls, you may not be able to fix them. In that case, you can always have them replaced.


Knowing when to call a professional

If your plumbing is damaged, you should call a plumber. Not all damage can be fixed by a professional, and you want to make sure that the damage to your plumbing is significant enough to warrant calling a professional. If you notice any water on the ground or in your walls, you should call a plumber as soon as possible. On the other hand, if you have any signs of dampness, you can try to seal the damage yourself. You can use sanitary towels or paper towels to plug the leak. Once you’ve taken care of the damage to your plumbing, you can take the rest of your home off of the damage list. That’s the beauty of plumbing systems. With the right maintenance, your plumbing can last many years without a single fault.



So, there you have it! Plumbing pipes are a useful part of the home, but they can do more harm than good. These tips can help you prevent damage and keep your pipes in good working order. If you have any questions, don’t hesitate to ask a plumber. Now that you know how damaging plumbing pipes can be, you can take the proper steps to prevent damage. You’ll be better prepared to keep your pipes from causing any damage, and your plumbing from leaking in the first place.

Guess what’s next?