If you want to re-design your bathroom, you may be wondering whether you can move your toilet. This task can be tricky, and requires tearing down walls and floors. It may also require re-piping the plumbing. There are even places where you’ll need a separate drainpipe for the toilet.
First, you must consider the location of the toilet. If you’re moving the toilet five feet, you can still run the pipes in the new location, but it will require a lot more work than moving the toilet. The drainage line has to be moved up and down, and it will also need to be aligned with the water supply line.
Another possibility is to hire a professional plumber. This method may be a bit more expensive, but it won’t break the bank. You’ll still need to take care to avoid causing any damage to the new location. Professional plumbers are well-versed in the process of moving toilets, and can assess your situation to make sure the entire process goes smoothly.
Moving the plumbing is a relatively complicated process, and it will cost you from $200 to $500 to complete the job. This procedure requires professional plumbers to cut the floor and reroute the pipes. It can also cause extensive damage if the plumbing is not properly connected. Unless you have the right tools and know-how, this process is best left to a professional. But before you get started, you should get a quote for the work.
Changing the supply line can be tricky, but if you have a water supply pipe that’s long enough, you can make it shorter by using PEX pipes. Just be sure to install the shut-off valve on the exterior wall. If it’s possible, you can connect the new supply pipe with the old one.
If you’re planning to move the toilet, you should cut the bend in the old one so that you can connect to the new one. Remember that you’ll need about 15 inches of space from the old drain pipe to the new toilet. Then, you can run a new drainpipe to the new location. Make sure that you route the new drainpipe so that it slopes towards the waste stack. However, you may also need additional PVC or ABS fittings to create a stable route.
If you’re planning on moving the toilet, you need to get help from a plumber. This will ensure you get the most value out of your investment, as well as meeting all technical requirements. In addition, you’ll have to dig a new hole in the floor, and replace the waste and water pipes. And remember, it’s not always easy to move the toilet to the new location. Fortunately, there are a few simple solutions that can help you achieve your goals.
The basic plumbing for a toilet is a bit complicated, so you’ll need a bigger hammer and pry bar to help you with the demolition. Before you start, make sure you use protective gear, goggles, and a safety mask. And make sure you know the exact dimensions of the drainpipes and water supply connections before you start any demolition.
Moving the plumbing water lines can be a difficult job, so you’ll want to get help from a professional to make sure the job goes smoothly. A professional plumber will be able to move pipes safely and without any accidents. Unless you’re a master plumber, you should always check with a plumber to avoid costly mistakes.
Often, the pipes to a toilet run through the floor. To access the drainage pipes, you’ll need to cut up the flooring to get access to the subfloor. You can then use the screwdriver to drive the Tapcon screws into the subfloor. Once you’ve made sure you’ve drilled to the correct depth, you can then connect the water supply and re-install the toilet.